Kerosine (petroleum), straight-run wide-cut; Straight run kerosine; [A complex combination of hydrocarbons obtained as a wide cut hydrocarbon fuel cut from atmospheric distillation and boiling in the range of approximately 70 °C to 220 °C (158 °F to 428 °F).]
See how the hazards of Kerosine (petroleum), straight-run wide-cut; Straight run kerosine; [A complex combination of hydrocarbons obtained as a wide cut hydrocarbon fuel cut from atmospheric distillation and boiling in the range of approximately 70 °C to 220 °C (158 °F to 428 °F).] combine into label elements for your jurisdiction (EU CLP, GB CLP, OSHA HazCom) — the correct pictograms, signal word and H-statements, with CLP Article 26 precedence applied and explained.
Handling and Storage Guidance for Kerosine (petroleum), straight-run wide-cut; Straight run kerosine; [A complex combination of hydrocarbons obtained as a wide cut hydrocarbon fuel cut from atmospheric distillation and boiling in the range of approximately 70 °C to 220 °C (158 °F to 428 °F).]
Kerosine (petroleum), straight-run wide-cut; Straight run kerosine; [A complex combination of hydrocarbons obtained as a wide cut hydrocarbon fuel cut from atmospheric distillation and boiling in the range of approximately 70 °C to 220 °C (158 °F to 428 °F).] is classified as a serious long-term health hazard. Exposure must be minimised using engineering controls (local exhaust ventilation, closed systems). Biological and medical monitoring may be required. Refer to the full Safety Data Sheet (SDS) Section 8 for occupational exposure limits.
This substance carries the signal word DANGER, indicating the more severe hazard categories under GHS/CLP. Facilities handling Kerosine (petroleum), straight-run wide-cut; Straight run kerosine; [A complex combination of hydrocarbons obtained as a wide cut hydrocarbon fuel cut from atmospheric distillation and boiling in the range of approximately 70 °C to 220 °C (158 °F to 428 °F).] should ensure a written hazard communication programme, including current SDS, employee training records, and GHS-compliant labelling on all containers.
This information is provided for reference only. Always consult the official Safety Data Sheet (SDS) and applicable national regulations before handling this substance.
The GHS classification shown above for Kerosine (petroleum), straight-run wide-cut; Straight run kerosine; [A complex combination of hydrocarbons obtained as a wide cut hydrocarbon fuel cut from atmospheric distillation and boiling in the range of approximately 70 °C to 220 °C (158 °F to 428 °F).] corresponds to Section 2 of its Safety Data Sheet. Learn how a compliant 16-section SDS is structured and authored.